2023 was a good year, and you?

[Bill Murphy]

Tell us about the sleeve job.

[BRDHNTR]

I had much fun shooting my 410 iver johnson skeeter

[C.O.B.]

Originally Posted by Bill Murphy

Tell us about the sleeve job.

John Hosford had the tubes (very lucky there) there 28 inches so the same length. The barrels bulged beyond repair. He will cut them a little behind the chamber due to the damage. The downside is the gun will be a 2 1/2 chamber vs the original 2 3/4. The good news is I have a set of 28 inch barrels that were made by Purdy and he will fit those. It will end up a 2 barrel set one for 2 1/2 and the other 2 3/4 . The original ribs will be used for the sleeve job.