2023 was a good year, and you?

[Bill Murphy]

Rich, whatchoo gonna do about the skeet gun. How about a session with a brass hammer? How about breaking up a two barrel Repro set? What exactly are your plans?

[C.O.B.]

Originally Posted by Bill Murphy

Rich, whatchoo gonna do about the skeet gun. How about a session with a brass hammer? How about breaking up a two barrel Repro set? What exactly are your plans?

Bill I'm having it sleeved as they were beyond repair but will ALWAYS be on the lookout for a set of 28 inch 00 frame ejector barrels. Probably have a better chance of winning the lottery

[Bill Murphy]

Tell us about the sleeve job.

[BRDHNTR]

I had much fun shooting my 410 iver johnson skeeter

[C.O.B.]

Originally Posted by Bill Murphy

Tell us about the sleeve job.

John Hosford had the tubes (very lucky there) there 28 inches so the same length. The barrels bulged beyond repair. He will cut them a little behind the chamber due to the damage. The downside is the gun will be a 2 1/2 chamber vs the original 2 3/4. The good news is I have a set of 28 inch barrels that were made by Purdy and he will fit those. It will end up a 2 barrel set one for 2 1/2 and the other 2 3/4 . The original ribs will be used for the sleeve job.