I’ve been messing recently with some original Winchester 10 gauge hulls and am trying to use smokeless in them . However the way the primer housing has powder below the fire exit hole sometimes they don’t ignite properly so I bought some 3/4” diameter plastic dowel rod and cut some discs about the same thickness and the primer thing in the bottom of the shell sticks up . Tried hot melt glue and that isn’t holding them all consistently so I need to get some two part epoxy I think . But as to the actual load I plan to use my regular 10 gauge Ross Seyfried load with some minor adaptions.
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
|
Threaded Mode