Quote:
Originally Posted by Dean Romig
I just came up from my gun room where I took the forend off a 16 gauge 0-frame GH and shaking it, got a bit of wiggle so knew it was a tiny bit loose. I smoked that front surface of the rear lug and put the barrels back on and then took them off again. The soot was cleanly rubbed off the entire surface of the lug.... I was surprised to have seen that on a 'loose' gun. 
. |
As long as it's on face, and your fit of the lug to frame is that good, the looseness is probably a worn front hook, and Brian's oversized roll joint would take care of that.
What I am wondering is how many times people had an off-face condition, on a Parker, where a non original set of barrels are being fitted by some means of moving the barrel back, thus opening up the lug/frame fit. This would seem to me to be a temporary fix that will only worsen again.
Threaded Mode