Recoil Pad ??

[Wild Skies]

Originally Posted by Mark Landskov

Are the Silvers pads still being made, or would they be NOS?

Silver's pads are still being made. You can purchase them via e-mail direct from Kynoch in England for about $50 each--about $25/pad less than those selling them stateside.

http://www.new-kynoch.apt-sites.com/...%20Leaflet.pdf

[Parker Bachelder (Brad's Profile)]

Mike, an original Silvers pad in red would be correct or the gun. It would make your lop 15 1/2, which would be better for you given your height. If your stock has not been cut, you would need a pad with the Nib. The Nib is oversized as is the pad,and needs to be fitted. We do stock them in all configurations and install quite a few of them.

Brad

[Mike Stahle]

Originally Posted by Brad Bachelder

Mike, an original Silvers pad in red would be correct or the gun. It would make your lop 15 1/2, which would be better for you given your height. If your stock has not been cut, you would need a pad with the Nib. The Nib is oversized as is the pad,and needs to be fitted. We do stock them in all configurations and install quite a few of them.

Brad

Thanks Brad,
The stock must have been cut, there is no "Nib"

[Mike Stahle]

Thanks for the helpful info. guys.
Hope I did it right, I Just placed
an order for these two items.
I didn't order screw's, I'm thinking
the ones I have should work.

edit: (New screw's come with the pad :-)

http://www.csmcspecials.com/Original...er_p/pp005.htm

http://www.csmcspecials.com/Recoil_P...16_p/pp025.htm