So it would seem reasonable to be proactive and glasbed or reinforce the head of the stock in some way before using boomer loads
Yes, I would agree that that would solve the problem. I have sometimes relieved a sliver of wood from behind the lock plates of L.C. Smith guns and reinforced with acra-glas. It's solves the cracking problem so common on these guns. I like to get to them before they start to crack. Wood can be relieved in the stock head of Parkers and reinforced with acra-glas also but I have never done that with a gun that wasn't already cracked. My solution is to never use boomer loads since, in my opinion, nothing is to be gained but heavy recoil.
Many times a crack such as you have shown in the pictures does not show on the exterior for some time. I have taken Parkers apart that seemed ok until the stock head was exposed. I hate to see this. It's not a hard fix and its a permanent one, but its better to use sensible loads to prevent further cracking or any cracking in the first place.
|
Threaded Mode