Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Harry,the chances are you're going to need to put in a shim under the trigger plate tang. One or more pieces of 100 pound paper, or even brass shim stock. Make sure all three trigger plate screws forward of the trigger bow are tight and the plate is flush, before tightenine either tang screw. The stock head is likely softened up with oil, and it's allowing the trigger plate to pinch the bolt, because I don't think the trigger plate is firmly seated.
The Following 6 Users Say Thank You to edgarspencer For Your Post:
Threaded Mode