Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Reproductions

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Unread 01-09-2018, 01:12 PM   #2
Member
MD*GSP
PGCA Member
 
Scot Cardillo's Avatar

Member Info
 
Join Date: Dec 2014
Posts: 636
Thanks: 1,112
Thanked 671 Times in 244 Posts

Default

Certainly wouldn’t constitute an anomaly b/c both barrels could have easily been acquired from Regeant, upon request. You might consider asking the seller for close up and, clear photos of the barrel flats in order to study all inscriptions. I would also look at photos of the case to see if there are any filler blocks in place for both barrel sets b/c I highly doubt 2-barrel cases were made to accommodate two twenty-six inch barrels in lieu of the most commonly encountered two-barrel set comprised of a twenty-six and a twenty-eight inch set of barrels.

I have to say, I find it fascinating 26” barrels are considered sub-par to 28” barrels but, that’s just my viewpoint. It's entirely conceivable the person who originally ordered the gun preferred 26" barrels.

Good luck

*Edited to add: typically, a two barrel set w/a set of 28" barrels will include a small filler block for the 26" barrel so they don't slide side-to-side while stored in the case. (It occurred to me you may not be aware of that)
Scot Cardillo is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:58 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.