SAFETY RESETS HALFWAY

[Andy Clark]

If you remove the front tang screw bushing, which you will notice 2 notches in the top of it, you can unscrew it with a very fine & wide tipped screw driver. Then the safety pin will fall right out.

[J. A. EARLY]

Originally Posted by Andrew Clark

If you remove the front tang screw bushing, which you will notice 2 notches in the top of it, you can unscrew it with a very fine & wide tipped screw driver. Then the safety pin will fall right out.

Thanks. I already looked for the slots in the bushing when I had it apart but I could not find them. I think someone has been in there modifying things.

[Andy Clark]

I have a gun like that. I used an easy-out that just fit snug and backed it out enough and it did not damage the bushing. If you don't have an easy out take the screw to the hardware store and find one that close and will thread into the bushing. That should work!