Eric, these were Cheditte hulls and primers cut to 2 7/8, 34gr of 4756, PT1044 wad with one wrap of heavy mylar wrap in the shot cup, 1 1/4 oz of ITX BB,s (80 pellets I counted them for every shell, over shot card with a roll crimp sealed with duco cement to keep out moisture. I have not had them tested, but by comparison to the bismuth data and talking to people at Balistic Products, it should be around 5000 psi. and about 1150 fps. They seem mild with low recoil when you shoot them. I am not one to do much experimenting with loads since there are so many variables which can be dangerous. You decide for yourself. Hope this helps. Carvel
|
Threaded Mode