Quote:
Originally Posted by Eric Grims
If I understand your reassembly problem you cannot get the bolt to seat forward so you can reassemble. I have my M12 trap gun do this on occasion. Some just don't want to lock forward with a thumb push. If you cannot get it to seat take the stock off (it is simple). There is a hole in the rear of the frame that you can put a rod through push the bolt forward and seat it. Last time I used a chop stick.
|
After I've had my morning coffee tomorrow I'll sit down with the gun and tackle it. I put Art Pepper on Pandora to sooth my nerves while I struggle. I've done it before and have not had to remove the stock....yet.
Threaded Mode