Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
If I understand your reassembly problem you cannot get the bolt to seat forward so you can reassemble. I have my M12 trap gun do this on occasion. Some just don't want to lock forward with a thumb push. If you cannot get it to seat take the stock off (it is simple). There is a hole in the rear of the frame that you can put a rod through push the bolt forward and seat it. Last time I used a chop stick.
Threaded Mode