28" 12 Gauge Repro Barrels

[Steve Hodges]

Repro Guys- Can you find 28" 12 Gauge Repro Barrels if you look and waite, or are they like finding a needle in a haystack? Thanks.

[Todd Schrock]

Well, finding a 28" 12 ga. Repro w/ a straight stock has been like finding a needle.......Good luck!

[Wild Skies]

Originally Posted by Stephen Hodges

Repro Guys- Can you find 28" 12 Gauge Repro Barrels if you look and waite, or are they like finding a needle in a haystack? Thanks.

You'll eventually find them, but you're going to have be real diligent and look real hard---and you might wait awhile before a set becomes available. There were a couple of 12-ga. 28" barrels sets sold within the last couple of years, one of them an unfired set for a Steel Shot Special. They are out there and a set will eventually become available, but expect to pay ~ $1900 for them. I would recommend you put out a "Wanted To Buy" ad on all the double gun oriented sites, cross your fingers and see what happens.

[Steve Hodges]

Originally Posted by Todd Schrock

Well, finding a 28" 12 ga. Repro w/ a straight stock has been like finding a needle.......Good luck!

Here is one at Cabelas, but it has 26" barrels.

And thanks for the posts gents................

http://www.cabelas.com/product/Parke...r+reproduction

[Steve Hodges]

Sorry, double post

[SXS OHIO]

I will say the 12ga repro's with 28" barrels and DT are the most scarce of the standard run guns right behind the 410 sets. Single trigger guns will come availible but 28" DT guns are very very scarce indeed...I can remember only two 12ga.-28" DT guns selling on the net in the past 5-6 years that I have been watching. I know of three DHE 410/28 sets that have DT and I think there is only 4 or 5 410 ever made with DT.......I have been after a BHE grade DT repro in any gauge for a long long time with no luck!!!! I have never seen a BHE DT gun for sale on the net!!! Whats that tell us??? SXS ohio....(-:

[Wild Skies]

Is this thread about 28" 12-ga. Repro barrels or 12-ga. Repros with 28" barrels?

Kenny, you and I must not be looking at the same gun listings. Over the years I've seen several 12-ga. Repros with 28" barrels and DT's listed, albeit not as many as you'll find with ST's of course.

[Steve Hodges]

Originally Posted by Greg Baehman

Is this thread about 28" 12-ga. Repro barrels or 12-ga. Repros with 28" barrels?

Kenny, you and I must not be looking at the same gun listings. Over the years I've seen several 12-ga. Repros with 28" barrels and DT's listed, albeit not as many as you'll find with ST's of course.

Just a set of 28" 12 Gauge Repro barrels............................

[SXS OHIO]

Wild Skies...I check the big three auctions everyday now for years and several other sights.....you must have some special places to look. I have found only two guns that were original DT and 28" 12ga repro's, plus one sporting clays gun that had a pad installed. I will say when one comes up its gone in short notice if not a stupid high price. I don't follow the live auction houses mutch either and may miss some good ones there. They really are hard to find, I don't think there was that many made. Im good on DHE guns but still looking for a BHE DT gun in any gauge...so if you find one let me know...thanks Kenny....(-:

[Tony Guccioni]

Originally Posted by Kenny Graft

Wild Skies...I check the big three auctions everyday now for years and several other sights.....you must have some special places to look. I have found only two guns that were original DT and 28" 12ga repro's, plus one sporting clays gun that had a pad installed. I will say when one comes up its gone in short notice if not a stupid high price. I don't follow the live auction houses mutch either and may miss some good ones there. They really are hard to find, I don't think there was that many made. Im good on DHE guns but still looking for a BHE DT gun in any gauge...so if you find one let me know...thanks Kenny....(-:

Your inference is that the double triggers on this gun were an aftermarket addition ... Correct ?