|
08-05-2021, 08:23 PM | #3 | ||||||
|
Right now I'm on a long legged, high condition, and rarity spree. All three of them do not have to be rolled into one firearm. I have purchased a few high condition guns of light that actually had 28 inch barrels, yes I know that is outside of my normal MO. These guns were purchased strictly for collecting purposes and I thought I got a decent deal on them. I am also on a quest for some nice hammer guns. I would like to get a 16 with at least 30 inch barrels in any grade and any 12 gauge with 32" or longer barrels that has dimensions I can shoot that has condition. I have noted that I appear to be getting a little finicky.
|
||||||
The Following 7 Users Say Thank You to Randy G Roberts For Your Post: |
08-05-2021, 09:25 PM | #4 | ||||||
|
Yes, dimensions must be right.
__________________
"Life is short and you're dead an awful long time." Destry L. Hoffard "Oh Christ, just shoot the damn thing." Destry L. Hoffard |
||||||
The Following User Says Thank You to John Davis For Your Post: |
08-05-2021, 09:35 PM | #5 | ||||||
|
I will easily fall for a small-bore, high grade, high condition, composite barreled, hammer gun, either Lifter or T/A… yeah, yeah… I’d fall for something like that.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
The Following 5 Users Say Thank You to Dean Romig For Your Post: |
08-05-2021, 09:50 PM | #6 | ||||||
|
ANY THING I LIKE !
Harry |
||||||
The Following 6 Users Say Thank You to Harry Gietler For Your Post: |
08-05-2021, 11:10 PM | #7 | ||||||
|
VHE 28 , 30 or 32 inch . 32” 16 gauge hammer and hammerless . 32” hammerless 20 gauge . I’ve got 32” 10’s snd 12’s I’m okay with . If I could add 32” for both 16’s the 20 and 28 that would be the pooh so to speak (or atleast at this point in time I think it would).
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
The Following 4 Users Say Thank You to CraigThompson For Your Post: |
08-06-2021, 02:50 AM | #8 | ||||||
|
Craig, the 32" 28 and the 32" 16 hammer gun will require some check writing. I think I will bail out of my search for those two.
|
||||||
The Following User Says Thank You to Bill Murphy For Your Post: |
08-06-2021, 06:01 AM | #9 | ||||||
|
Not that I need any more Parkers but I would seriously consider a BH, GH and PH in 20ga with damascus barrels in mostly original condition with dimensions that work for me, uncommon guns but attainable except maybe the BH.
|
||||||
The Following 5 Users Say Thank You to Craig Larter For Your Post: |
08-06-2021, 07:41 AM | #10 | ||||||
|
A graded Philly Fox 20 ga. with 28" barrels, the right chokes, and the right dimensions.
A 12 ga. BE Philly Fox with 32" barrels, original chokes, and uncut wood, in higher condition than the one I have. An American made .410 S X S with 30" barrels, in good+ original condition (that I can afford). |
||||||
The Following 3 Users Say Thank You to Stan Hillis For Your Post: |
|
|