 |
|
 |
|
 |
|
 |
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account!
To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
John D.
|
 |
|
Hammer/Lifter Extractor..... |
|
07-05-2010, 04:51 PM
|
#1
|
Member
|
|
|
|
Member Info
|
Join Date: Jun 2010
Posts: 1,465
Thanks: 1,553
Thanked 577 Times in 319 Posts
|
|
Hammer/Lifter Extractor.....
......serialized to the gun? The extractor on my Lifter, 10250, is not serialized to the rest of the gun. Is this normal? The reason I am asking is, I had to carefully file quite a few thousandths off it so the barrels would close without binding. I made sure that the recess in the barrels and the extractor itself were scrupulously clean before filing. I am thinking that this may be a replacement extractor that was not fitted properly. Any ideas from you all? Cheers!
|
|
|
|
|
Extractor |
|
|
07-05-2010, 10:57 PM
|
#2
|
|
Member
|
PGCA Invincible
Life Member
|
|
Member Info
|
Join Date: Jun 2009
Posts: 676
Thanks: 0
Thanked 410 Times in 198 Posts
|
|
Extractor
Internal parts and hammers often have serial (last 3 digits) stamps differing from those on the frame. I have had a couple of extractors with differing numbers. The fact that your extractor required some filing may indicate a swapped part, but it's a toss up.
Best, Austin
|
|
|
|
|
Linear Mode
