Visit John Powers's homepage! | |
cocking a parker with the forearm off |
12-26-2014, 10:17 PM | #3 | ||||||
|
cocking a parker with the forearm off
Some how when I had my parker apart I managed to decock the hammers. I can put the barrels on but I can't get the forearm on. Where are the cocking levers?
I've never had this issue before. I'm not that familiar with Parkers. |
||||||
12-26-2014, 10:59 PM | #4 | ||||||
|
If it's an ejector gun. take a look at FAQ #15.
|
||||||
The Following User Says Thank You to Robin Lewis For Your Post: |
12-27-2014, 11:55 AM | #5 | ||||||
|
Push in on the unhooking slide pin on the from of the frame while opening the gun. This will allow the gun to cock without the forend installed.
Be careful to push in hard and open with care as the hook could Not catch if enough pressure is not applied to the pin.
__________________
B. Dudley |
||||||
12-27-2014, 02:32 PM | #6 | ||||||
|
Thanks for all your input. The diagram in FAQ #15 solved my issues. I appreciate all your help.
Mike |
||||||
12-27-2014, 11:48 PM | #7 | ||||||
|
Please tell me how to go to FAQ #15...I go to FAQ above and put in search and nothing
|
||||||
12-28-2014, 05:52 AM | #8 | ||||||
|
Go to the "PGCA Home" page, once there look at the column on the left and click on "Parker FAQs" (2nd from bottom), a new page comes up, go to #15 and click on it--you should then see the instructions.
__________________
Wild Skies Since 1951 |
||||||
12-28-2014, 06:37 AM | #9 | ||||||
|
Thanks.. that worked fine..and FAQ
15 was a great help also |
||||||
|
|