cocking a parker with the forearm off
 

how do you cock a parker with the forearm removed.

thanks Mike

Why? But if you must, it is best to use a stationary block of wood and push the cocking hooks down.

cocking a parker with the forearm off
 

Some how when I had my parker apart I managed to decock the hammers. I can put the barrels on but I can't get the forearm on. Where are the cocking levers?
I've never had this issue before. I'm not that familiar with Parkers.

If it's an ejector gun. take a look at FAQ #15.

Push in on the unhooking slide pin on the from of the frame while opening the gun. This will allow the gun to cock without the forend installed.

Be careful to push in hard and open with care as the hook could
Not catch if enough pressure is not applied to the pin.

Thanks for all your input. The diagram in FAQ #15 solved my issues. I appreciate all your help.


Mike

Please tell me how to go to FAQ #15...I go to FAQ above and put in search and nothing

Go to the "PGCA Home" page, once there look at the column on the left and click on "Parker FAQs" (2nd from bottom), a new page comes up, go to #15 and click on it--you should then see the instructions.

Thanks.. that worked fine..and FAQ
15 was a great help also