Recoil Pad ?? - Page 2

Parker Bachelder (Brad's Profile) · 10-29-2010, 09:09 AM

Mike, an original Silvers pad in red would be correct or the gun. It would make your lop 15 1/2, which would be better for you given your height. If your stock has not been cut, you would need a pad with the Nib. The Nib is oversized as is the pad,and needs to be fitted. We do stock them in all configurations and install quite a few of them.

Brad

Mike Stahle · 10-29-2010, 09:44 AM

Quote:

Originally Posted by Jent P Mitchell III

Hello Mike, Do you plan on shooting this Parker at clays or live birds ??? If you are 6 feet and 4 inches tall this butt stock will need to be at least 1 and 1/2 inches longer and maybe 2 inches longer to the full length of pull from the center of the front trigger to the center of the butt for you to shoot it successfully. The drop will also most likely be way to much for you especially after you have the butt stock length corrected for your size and height. As you address the length of pull and the drop you will need to study the pitch on the butt stock. I can send you some pictures of how to measure these three points all at once. Good Shooting To You, Jent --- jentpmitchell@msn.com

Most of my hunting these days is Squirrel, Rabbit, Pheasant
and occasionally clay birds.
I agree, the gun would feel more comfortable to me with about
2” more in stock length.
Jent, I will email you. I would indeed be interested in those pictures.

Mike Stahle · 10-29-2010, 09:46 AM

Quote:

Originally Posted by Brad Bachelder

Mike, an original Silvers pad in red would be correct or the gun. It would make your lop 15 1/2, which would be better for you given your height. If your stock has not been cut, you would need a pad with the Nib. The Nib is oversized as is the pad,and needs to be fitted. We do stock them in all configurations and install quite a few of them.

Brad

Thanks Brad,
The stock must have been cut, there is no "Nib"

Mike Stahle · 10-29-2010, 04:25 PM

Thanks for the helpful info. guys.
Hope I did it right, I Just placed
an order for these two items.
I didn't order screw's, I'm thinking
the ones I have should work.

edit: (New screw's come with the pad :-)

http://www.csmcspecials.com/Original...er_p/pp005.htm

http://www.csmcspecials.com/Recoil_P...16_p/pp025.htm