LC SMith Extractor Question

[BRDHNTR]

Mark, it was a bitch putting the barrels back on the frame as I had to rotate the 'roll check' into the right position so the barrels would seat properly to the frame. Does this indicate a problem somewhere?

A (USN-R)
Retired civilian though!

[Big Friend Ten (BFT)]

There is no problem with the LC Smith but it is not a Parker or Fox design.

Rotate the roll check all the way clockwise and push the extractor down. Then insert the roll check lugs into the action and close the gun.

Mark

[BRDHNTR]

Here are some photos of this Smith I just picked up. The gun is clean and whoever did the blueing and stock work did a nice job but the frame should have been case colored not blued. The good news is the blueing can be easily removed and the frame case colored. I may send it to Turnbull and have them do it. But at the end of the day, it's not meant to be a show piece but a decent shooter.