are you reblueing or just touching up?
touch ups are simple -degrease the area ( and don't touch that spot with bare hands after degreasing) follow the instuctions
a whole blueing job - clean off the old finish (they make blueing removers)and polish the part (barrels?) if the metal finish is good to start, I buff with 400- 600- and 1000 grits -then degrease and degrease again - same as above - no bare hands now.
apply in a smooth long stroke - let it sit per instructions - buff lightly and reapply
repeat until the finish gets to where you want it.
mostly - a good result is the result of proper prep work and cleanliness - then patience
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE
|
Threaded Mode