Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Yes, of the three photos of the bottom of the receivers, my friend's older 10 hammerless LC Smith has the squared corners, the two guns shown above that look to have the later front corners with a radius. Do you have any load data for the 6000 psi short ten gauge loads you would care to share- with the understanding that if we use your data, you are in no way responsible if something untoward might occur. Always error on the margin side of safety!
Good photos- best I've yet seen
Threaded Mode