Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Chuck,
As per an article I found on the 'net, I used the Pilkington's, diluted to about 50% strength after the first coating at full strength. I am only aware of two commercially available rust blue solutions...the Brownell's house brand and the Pilkington's. I've tried them both on fluid steel tubes and had better luck with the Pilkington's. If anyone knows of a better commercially available rust blue solution, I'd appreciate hearing about it.
Hybrid Mode