Restored DH 10

[Larry Angus]

Originally Posted by John Dallas

I'm confused (an icreasingly common phenomenon, these days). I thought the "fat headed" screws were intended to be set in the gun, then marked for indexing, and after cutting off the top of the screw, recutting a slot in the proper orientation.

I only have two parkers both Trojans and the bolts which are factory original are not "flat" or even with the surface of the frame, rather tapered even with the frame.

[Larry Angus]

Originally Posted by LarryAngus

I only have two parkers both Trojans and the bolts which are factory original are not "flat" or even with the surface of the frame, rather tapered even with the frame.

Correction, the trigger plate bolts are flush.

[Bill Murphy]

Some receiver screws on single traps are filed flat.