|
 |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
02-07-2012, 04:32 PM
|
#3 | ||||||
|
It's not the first one to have two screws placed in them by a jack of all trades. Probably the original screw (closest to the triggers) could not be tightened, the wood having been stripped out, or number two it could not be tightened due to a split inside down the middle of the stock. Instead of fixing it, they get out grandpa's drill and place another hole right in the serial number with a second screw. At least if it was a split inside down the middle they did not place a bolt through the stock head also. I've got one with two screws like that I'm fixing now with a another trigger guard and another where they driled the original hole even bigger and put a monster next size screw in it.
It usually only occurs to them how to fix it after the damage was done and then someone tells them to fix the stock and then they won't need a second screw. But in 1950, who cared? |
||||||
|
|
||||||
 |
 |
 |
|
|
|
02-07-2012, 06:29 PM
|
#4 | ||||||
|
Go back to your local gunsmith and see if he has any parts "left over" following his work. An easy piece to leave out which would account for the gun not cocking is the cocking slide - #13 on the parts list you can view by going to the home page of this site and selecting Technical Information from the menu on the left.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
02-08-2012, 11:40 AM
|
#5 | ||||||
|
And it would be easy to tell if the cocking slide was left out because when you opened the action, the lever would not stay to the right, since the trip/pin/spring slide into the little dimple on the cocking slide and without pressure from the cocking slide the three parts would just be dropped down into the action.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Jerry Harlow For Your Post: |
 |
|
|
Hybrid Mode