Old Reloading Manuals - 2 7/8" 10ga recipes

[Kensal Rise]

JB:
I'm letting a bit of the cat out of the bag here (regards an upcoming DGJ story of mine) but here are two loads that I use in a W&C Scott 10-bore:

Target: Federal case cut to 2 7/8, Win 209 primer, 21.1 grs of Clays, BP deci-Max with 16 ga. .135 card and 3/8 felt wads inside, 1 1/8 oz. of No. 8. Load is 1217 fps and 7640 psi according to Armbrust.

Hunting: 1 3/8 oz of No. 6 in same case, same BP wad, two .135 16 ga cards inside, 28 grs. of Int. Clays. 1246 fps and 10,100 psi by Armbrust.

Best Kensal

[J.B. Books]

Originally Posted by Kensal Rise

JB:
I'm letting a bit of the cat out of the bag here (regards an upcoming DGJ story of mine) but here are two loads that I use in a W&C Scott 10-bore:

Target: Federal case cut to 2 7/8, Win 209 primer, 21.1 grs of Clays, BP deci-Max with 16 ga. .135 card and 3/8 felt wads inside, 1 1/8 oz. of No. 8. Load is 1217 fps and 7640 psi according to Armbrust.

Hunting: 1 3/8 oz of No. 6 in same case, same BP wad, two .135 16 ga cards inside, 28 grs. of Int. Clays. 1246 fps and 10,100 psi by Armbrust.

Best Kensal

Thanks Kensal, are these star or roll crimp?