Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
My early 10 gauge Parker hammer guns have .804 bores! I did not have a bore gauge and mic'd the muzzel on the #2 frame lifter with about 30" barrels at about .774 and thought the gun was choked cyl and cyl. I shot the gun at the Southern a few years ago and while there Jent Mitchell measured the barrels and solved the mystery. I have measured the barrel lenghts on these Parkers, but can't recall exactly. I do think some vary from 1/16 to 1/4 of an inch.
Hybrid Mode