New forum member shooting a SC

[Pa SxS]

Bill,

Other than a buggered screw on the floor plate and a slightly misaligned screw also on the floor plate, looks like a nice SC SBT with a replacement Pachmayr recoil pad and front bead.

Tell us the barrel length and choke. You may also find that there are factory records available by going to the Home page, then the link to Research Letters. Type in the S/N and it will tell you if there are surviving records. Be aware that some books are missing so 100% of the records are not available.

[William Davis]

It's 32 inch have to guess at the choke hits them hard so must be full. A few of the screws are Buggered. I looked at it's near twin for sale this week down at Mid South in Wagram NC. One Phillip has is at least 10 or 15 % better condition than this SC hardly fired at all tight as the day it left the factory. This one has seen active use, other than the screws, not abused.

It's my first experence with a Vintage Trap gun or any dedicated Trap gun for that matter. Never had an eye for the space ship looking high rib guns. It's going to spoil me.

Will try that number look up.

Bill