Here are some photos of my stock repairs. I wonder how many short 'Super X' loads were to blame for, or contributed to, the numerous splits! The screw holes were punky from oil, so I drilled out the bad wood and filled the holes with Acra Glas. The proper sized drill bit made for a snug fit with the original screws in the Acra Glas. There is a large 'U' made from a coathanger imbedded in the head of the stock. My one ounce grouse loads should be easy on the wood. Cheers!
__________________
GMC(SW)-USN, Retired
'Earnest Will'
'Desert Shield'
'Desert Storm'
'Southern Watch'
|
Threaded Mode