What do you make of?

[Cold Spring]

What do our Parker experts make of the two 3's on the barrel flats of this 12g/32" VHE in the 208,000's serial number range? I don't have this Parker in hand as yet and thus haven't had a chance to measure its chambers.
.

[Mike Franzen]

My guess is chamber length. If that’s the case you have a rare gun.

[Researcher]

IMO more likely the chambers were lengthened after market and the gunsmith so doing marked the barrel flats.

The answer will be a letter from the PGCA.

[Cold Spring]

Interesting that the 3’s in question look like the same font as the factory overscript 3 on the barrel weight stamp ……. ?

[GH-16]

Originally Posted by Frank Srebro

Interesting that the 3’s in question look like the same font as the factory overscript 3 on the barrel weight stamp ……. ?

I agree, both 3's were made with the same stamp.

[Researcher]

I inherited three sets of letter and number stamps from my father. Guess I could whang a number on a barrel flat (I'd actually be afraid to) or in the wood under a trigger guard.

[Dean Romig]

The 3 oz. stamp is obviously made with a smaller 3 die.
The left and right barrel flat 3’s were made with the same die.





.

[Pa SxS]

You won't get any help from me, we don't have records for this gun.

[edgarspencer]

Who ever applied the 3 stamps could have gone the extra mile, or inch, and applied a " stamp, if it was intended to signify chamber length.

[Mike Franzen]

You’ll have to measure the chambers when you get the gun.