16 gauge 2 1/2” reloading issue - Parker Gun Collectors Association Forums

		Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Shotgun Shell Reloading
16 gauge 2 1/2” reloading issue

Notices

Welcome to the new PGCA Forum! As well, since it is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................

If you are registered to the forum and keep getting logged out: Please Click Here...

Welcome & enjoy!

To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account!
To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.

Hi Unregistered,

On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...

So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.

Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...

I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..

John D.

Thread Tools

Display Modes

06-28-2026, 12:27 PM

Member
Dakota Jeff PGCA Member

Member Info
Join Date: May 2017 Posts: 204 Thanks: 87 Thanked 487 Times in 104 Posts

Hi Matt,as Mike stated I would start with adjusting my final crimp die up and you may have to adjust the cam back down a little to get a nice crimp.Also if your stack height is a bit high can cause this issue, try using more wad pressure.If the wad is pre squished more it is easier for it to adjust back down verses very little wad pressure.Some wads are pretty stiff.Of course non of this explains why one hull loads nice and the others dont.Not knowing your load recipe,if you can't get it to work I've got quite a few tested loads one of which might work better.Jeff

The Following User Says Thank You to Jeff Sweeter For Your Post:

Mike Koneski

Previous
left arrow key Next
right arrow key Close Move

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 08:48 AM.