Sherman Bell 10ga Reloading recipes in PDF format

[Paul Harm]

This is only what I do - any of these loads with plastic wads can be used with paper wads and I believe the pressures would be lower and safe. I go up 10% with the powder charge when substituting fiber wads for plastic. Use your own judgment. Paul

[J. A. EARLY]

I want to load some 1 3/8 oz loads for a 12 gauge that I will also use in a 10 gauge with gaugemates (so I only have to load up one gauge that can be used in both).

But I want a heavier load with low pressure, much as the 1 3/8 oz and 1 1/2 oz loads Bell has for 10 gauge that are in the 8000 psi or less range.

Thanks.

[J.B. Books]

Originally Posted by Jerry Harlow

I want to load some 1 3/8 oz loads for a 12 gauge that I will also use in a 10 gauge with gaugemates (so I only have to load up one gauge that can be used in both).

But I want a heavier load with low pressure, much as the 1 3/8 oz and 1 1/2 oz loads Bell has for 10 gauge that are in the 8000 psi or less range.

Thanks.

There is only one powder I know of that will deliver such results, Hodgdon Longshot. ex. below.

12ga, Federal Gold Medal Hull, Lead Shot 1 3/8 oz. Longshot 27.3gr Rem. 209P Primer, Rem. R12H Wad 7,700 PSI, 1185fps