Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I don't know anything about a Pacific 266 but if the shot drop tube has a "bottleneck" at its bottom end, you might try enlarging the hole in its center with a small round file or a drill bit. That worked wonders with my 28 gauge MEC 9000 and the increase in diameter was only about 25 thou.
The Following 2 Users Say Thank You to Frank Srebro For Your Post:
Threaded Mode