Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
With 20.7 gr of WSH and the BP-1044, the top of the wad comes 0.84" short of the end of the hull.
The 1 1/8 oz. load of 7 1/2s comes about 0.33" short of the capacity of the wad.
Either I need a MUCH greater volume of powder or I need a shorter hull, AND I still need to add about 1/3" of fiber wad in the shot cup.
If the load works well, why not just cut the cartridges down?
That seems like the most efficient way to go.
I think I need to buy a "modern" 10 gauge to do some testing in
The Following User Says Thank You to Steven Groh For Your Post:
Threaded Mode