WINCHESTER 572

[Mike of the Mountain]

Originally Posted by Greg Baehman

Yes, I've seen that data, but like I previously mentioned some of us would like to see some 7/8 oz. 572 load data published as well.

Make some up and send them for testing. If 1 oz loads fall between 5400 and 6900 PSI, I'd bet that the 3/4 oz loads would fall in a very similar range.

[Double Lab]

You can. safely drop that load to 7/8 or even better 3/4oz. You can thank me later.

[6pt-Sika]

Originally Posted by Daryl Corona

You can. safely drop that load to 7/8 or even better 3/4oz. You can thank me later.

What do you load in the 28 , 5/8’s ounce ?

[Double Lab]

Originally Posted by CraigThompson

What do you load in the 28 , 5/8’s ounce ?

Nope, standard 3/4oz 28ga load, 1150-1200fps.

[J.B. Books]

I am a little surprised that nobody has asked where to find a bushing chart for Winchester 572 because it is not listed in the official MEC bushing chart. Hodgdon has their own MEC bushing chart and the MEC bushings throw same number of grains for both Longshot and Win 572 but the two powders are not interchangeable as far as I know.