Stock Refinish

[Jim DiSpagno]

The shield is held in by 2 brass brads. If you remove it , you will probably have to re-inlet it so it is flush. The "2" could represent frame size. By the way, what is the frame size as indicated by a number 1, 11/2, or 2 on the bottom of the rear barrel lug

[Dylan Rhodes]

Originally Posted by Jim DiSpagno

The shield is held in by 2 brass brads. If you remove it , you will probably have to re-inlet it so it is flush. The "2" could represent frame size. By the way, what is the frame size as indicated by a number 1, 11/2, or 2 on the bottom of the rear barrel lug

It is a 1 frame