Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums General Parker Discussions

Notices

Reply
 
Thread Tools Display Modes
Unread 05-16-2011, 06:46 AM   #1
Member
Big Friend Ten (BFT)
PGCA Lifetime Member
 
Mark Ouellette's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 2,046
Thanks: 1,517
Thanked 2,935 Times in 795 Posts

Default

I have speculated on a couple Parkers with cut barrels at 50% their uncut value.

A Parker without UN-cut barrels but no remaining barrel constrictions (choke) is reduced in value a little. How much is up to the buyer and seller. Also, the gun itself would determine any NO-Choke discount. Consider a 32" barreled 10 or 12 gauge GH with no choke remaining. Discount? Yes. Now, please consider a 28" barreled AHE in 28 gauge. How much of a discount, if any, would be required for a highly desirable gun like that?

Finally, in my less than humble opinion, a classic SxS with barrels that produce patterns of IC to IM is perfect! If I wanted a collectable grouse gun then Skeet and IC or LM woudl be perfect. Once again, choke as a part of a gun's value would depend on its intended use.

Mark
Mark Ouellette is offline   Reply With Quote
Unread 05-16-2011, 08:20 AM   #2
Member
C.O.B.
Forum Associate
 
Rich Anderson's Avatar

Member Info
 
Join Date: May 2009
Posts: 6,092
Thanks: 2,226
Thanked 6,389 Times in 2,094 Posts

Default

If the barrels have been cut then the value is lowered by how much depends on several factors. As Dean mentioned a 26 inch length might make a great Grouse gun for someone and there could very well still be some choke left.

If the chokes have been opened and the original barrel length left unaltered I don't see this as a big determent in the guns value if within reason. A 32 in trap gun opened to IC is not the same as a 28 inch gun opened to IC/M.
Rich Anderson is offline   Reply With Quote
Unread 05-16-2011, 10:26 AM   #3
Member
Smoothebore
PGCA Lifetime
Member

Member Info
 
Join Date: Nov 2008
Posts: 283
Thanks: 365
Thanked 206 Times in 89 Posts

Default

First off, I've never gought a gun with known shortened barrels. But, I bought a set of 24" barrels on ebay for $88.00 including shipping. They were Dam-2, originally 28" long. I fitted them to a DH12ga that was original Titanic Full and full. They make a fun set of barrels for that gun. I even had the damascus refinished by Dale Edmonds. As a friend in Georgia at the time named it, "The meat gun". Short barrels can be a lot of fun, FWIW.

Dave
Dave Purnell is offline   Reply With Quote
Unread 05-16-2011, 10:36 AM   #4
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,112
Thanks: 4,580
Thanked 3,024 Times in 974 Posts

Default

Thanks for the replies so far. If I had been more specific, I would have specified lower grades as I understand it is a different game with the higher grades. Also, there seem to be a lot of damascus guns even up to DH grade that were cut. I know quail hunting at the turn and early part of the 1900's was a big sport so I understand the thinking, as that is what I hunted for my first thirty years of hunting and an open double is what one wanted.

Now that we are talking lower grades Trojan, PH, VH, even GH) any other valued opinions?

Thanks.
Jerry Harlow is online now   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:42 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.