Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I had a 12ga. Parker that did the same thing. I believe the rim needs to be deepened slightly. Examine shells that work and shells that don't. I found that some companies shells had a slight radius when you look at the side wall where it meets the rim. Those wouldn't work or were very difficult to close the gun on. The other shells that had a more 90 degree angle would fit in the chamber just fine. The solution was to deepen the rim cut.
The Following User Says Thank You to Chuck Bishop For Your Post:
Threaded Mode