Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Started on the new block I bought. Made two 10mm blocks (9mm will work in it was well) and two 22 hornet blocks. Still have to sand and varnish the last two I cut out of the block. Sanding out the the old previous cut scars on the blocks are a pain. Used a 1/2” bit for 10mm and 3/8” for 22 Hornet. The little piece of the block I cut from the neck will hold 15 Hornet shells. Figured it was better then tossing it.
Hybrid Mode