Factory 16 guage option

[Dean Romig]

Yes, Do that Dan - You won't regret it.





.

[Double Lab]

What Dean said. I've gone to 3/4oz in every gauge I load and find them more than equal the job I ask of them.

[Steiner]

Originally Posted by Daryl Corona

What Dean said. I've gone to 3/4oz in every gauge I load and find them more than equal the job I ask of them.

I'm a convert Daryl. I shot 12 gauge 3/4 once loads at the Southern and it was like shooting a 28 gauge.

[Double Lab]

Originally Posted by Dan Steingraber

I'm a convert Daryl. I shot 12 gauge 3/4 once loads at the Southern and it was like shooting a 28 gauge.

Yes and it's what makes a 28 gauge so much fun to shoot.

[Mike of the Mountain]

1 oz at 1165 is very reasonable especially at 7500 FPS or less. I shoot Fiocchi factory shells too and they break birds. I reload 2 3/4" and 2 1/2" 16g hulls. I use Green Dot, Unique and Longshot. All make soft shooting 1 oz loads and they stone pheasants even in the 2 1/2" hulls. Only reason I load 2 1/2" hulls is because I have so many of them. Plenty of recipes for both hull sizes.

[edgarspencer]

1165 fps isn't very fast, but dropping the load from one ounce to 3/4 oz is a 25% reduction in mass. The force to get an ounce up to speed will be reduced significantly having to only get 3/4 ounce up to speed. Remember when they told you in physics class that for every action, there is an equal and opposite reaction?

[Mike of the Mountain]

I remember physics class. 1 oz at 1165 is easy peasy. Try 1 1/2+ at 1200 + in an 8 bore. That’ll put manners on recoil-sensitive shooters.