10 gauge

[Dean Hanson]

Bob, Send Jeff Sweeter a line. He might be able to help you out.

[10 bore]

1 1/2 oz shot,fed 209a primer but any primer not as hot is ok, mec powder bushing 40# using blue dot powder, you might need a thin .070 16 or 20 ga. nitro card at bottom of the sp10 wad. over shot card and roll crimp. i use 6 shot found my 10s shoot this the best for patterns. This is what i shoot out of my 10s for turkey,but the are lots of loads on the 10 ga spread sheet here on the PGCA reloader page.

[Mike of the Mountain]

I normally load 1 1/4 oz of shot and Unique powder in my 10g loads. They are not hot and will break any clay out there. They will probably work well on turkey too with the larger shot instead of 7 1/2 or 8.

22.5g Unique, SP10 wad with a 16g 1/2" fiber wad in the cup topped with 1 1/4 ozs shot.