|
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
|
12-13-2023, 04:58 PM
|
#1
|
Member
|
|
|
Member Info
|
Join Date: Jun 2009
Posts: 588
Thanks: 32
Thanked 561 Times in 203 Posts
|
|
I started chasing 28 gauge NID’s in the early-mid 70’s. I’ve owned over 25 and seen/examined numerous others. I’ve never seen or heard of barrels longer than 28 inches long! Every field grade, but one, had 26 inch barrels. I had a number of grade 2’s and all but one had 28 inch barrels. I had 4 of the 10 grade 4’s and 2 had 26 inch barrels and 2 had 28 inch barrels. One of the grade 4’s was a 2 barrel set and both sets were 28 inches. A grade 5 I had was a 28 incher as was another 5 that I examined in the 90’s. I’ve always felt that higher grades were more often ordered with 28 inch barrels and vent ribs were prevalent! These are simply assumptions on my part based on decades of looking and observing.
|
|
|
|
The Following 17 Users Say Thank You to Bill Davis For Your Post:
|
Benny Keith, Bill Jolliff, Bob Jurewicz, Brett Farley, Dan Steingraber, Dave Noreen, Donald McQuade, Garry L Gordon, John Davis, keavin nelson, Larry Stauch, Mike Koneski, Robert Brooks, Russell E. Cleary, Scott Smith, Stan Hoover, Tom Kidd |
|
12-13-2023, 09:19 PM
|
#2
|
Member
|
|
|
Member Info
|
Join Date: Sep 2019
Posts: 1,204
Thanks: 2,860
Thanked 3,370 Times in 879 Posts
|
|
While not a 28 gauge, this is a 410 with 28” barrels, fully optioned
|
|
|
|
The Following 15 Users Say Thank You to Stan Hoover For Your Post:
|
allen newell, Bill Jolliff, Bill Murphy, CraigThompson, Dan Steingraber, Dave Noreen, E Robert Fabian, Garry L Gordon, J. Scott Hanes, John Davis, keavin nelson, Larry Stauch, Mike Koneski, Randy G Roberts, William Woods |
|