Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Approximately an inch from the top and bottom of the pad, there should be small (1/8") slits in the pad on the rear face. lubricate a Phillips screwdriver with Vaseliine, KY, or something similar and slide it in thru the slot, and feel around carefully until the screwdriver tip seats into the screw. Back out the screws (top and bottom), and bingo!