Most 10 ga shells have a high brass on them. If the used press was convered from 12ga, or just a little out of adjustment you'll have to look at a couple of things. I'm assuming the shell doesn't come back out of the resizing ring in the deprime station. The adjustable ring will have to be adjusted up so when you're at full up stroke the center punch will push the shell down far enough. Either that, or take the chrome tube off and disassemble the center punch. Get a longer 1/4-20 so the center punch will push the shell off the resizing ring. On my old Jr a washer or two and maybe a longer 1/4-20 screw will give you the added length to prime a shell.
__________________
Paul Harm
|
Threaded Mode