Quote:
Originally Posted by Dylan Rhodes
For the sake of my own education. How can you tell the barrels have been profiled to the frame and that material has been removed from the breech face? I can see clearly now that the rib has been contoured after reading the comments. I’ve been staring at the pictures for some time and I can’t see it, So I’d like to be able to identify it in the future. Is it the gap between the dolls head and the receiver? Could that not be caused by either removing the material from the dolls head only, removing material from the breach face only, or a combination of the two? Thanks in advance.
|
A set of VH barrels would have light engraving ticks around the breech. They are gone. So at least enough material was removed to eliminate the engraving.
The amount of a gap there is at the back side of the dolls head is an indication of a couple things. That the barrels were set back a lot, or there was some crude filing done in that area. Or both. More than likely the former. When the barrels are set back on the breech, that are opens up some. It is what it is. This amount is a lot. There really is not anything functionally wrong with it. As long as the barrels are on face.
Threaded Mode