Quote:
Originally Posted by Mike Koneski
John, if you reload for your shotguns you can remedy the lack of 2 1/2" shells. You can cut down 2 3/4" hulls, get some Ballistic Products (or another wad) in 12g short wad configuration. Get an "Advantages" manual from BP and get to reloading. Just remember the 2 3/4" and 2 1/2" lengths are for the fired hull, not the loaded hull. Takes a little time cutting down the hulls but once you have a stockpile of short hulls you'll be good to go.
|
Thanks. I have purchased the Trim Doctor 2 from BP, and am shooting regular 12 GA 2 3/4's in my Red Label to repurpose the hulls. The manual didn't have options for around or below 7,000 PSI pressure 2 1/2's with components I have been able to source yet, but I will keep trying. As I posted to Richard, Hodgdon sent me a table for 2 1/2' in that range, several 6,700's, but I have not been able to find any of their Universal powder, which all the loads specify.
Threaded Mode