Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
John, When you say the cam doesn't engage it sounds like the same problem I had with a 600 .410 when I tried to convert it from 2 1/2" to 3". And being that you got it on ebay, you don't know how it was previously used. The cam crimp assembly has the cam roller and a pin with two positions for the pin and roller. try driving out the pin and reinserting it in the other position. For whatever reason, this made all the difference on mine.
Threaded Mode