Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
So I was doing some late night experimenting and figured out how to get my 10 gauge hulls to crimp. I cut a piece from a 8 gauge fired hull to use as a sleeve so I could use my 10 ga hulls in my 8 gauge vice. The 4 pin roller does leave a nice crimp but its alot more sensitive to down pressure than the 1 pin.
Last edited by Milton C Starr; 05-13-2025 at 07:46 PM..
Threaded Mode