Quote:
Originally Posted by CraigThompson
Okay in the first place evidently I’m not part of everyone ! In a four hull 10 gauge race Federal would be third only beating WIN . I prefer REM’s then the RST’s . And yes I’ve used Federals , while I have no issue with them they aren’t my preference . To be honest just use what you can get . I typically put the same basic load in all four brands of hulls . Learn to be adaptable , life’s to short to worry about having only one specific whatever when a whole bunch of different things can be used in the same capacity .
|
There is a load that interest me particularly its a 1.5oz load @ 1150 fps 8300 psi I believe its the 24th load up from the bottom on page 2. I would like to try that in my 6 frame . There is also a 1.5oz bismuth load for bluedot at 7900 psi both of these show a lower pressure than the data I see for a 1 1/4 @ 1250fps bismuth load which is what RST sent me.
Threaded Mode