New Member Jeremy needs 10ga smokeless load data

[Mike of the Mountain]

Jeremy, I have been loading my 10g with 7625 and Unique with very good results.

[Jeremy Bert]

I have used this powder for low pressure loads for my 12. I am very careful about shotgun recipes ,always sticking to the components listed . I have no load data for 2-7/8"brass shells . There seems to be lots of data for plastic shells. Do you have any loads for brass and 7625 or any other smokeless powder ?

[6pt-Sika]

I’ve got two loads I use in REM or RST hulls but nothing for brass hulls .

[Mike of the Mountain]

Originally Posted by Jeremy Bert

I have used this powder for low pressure loads for my 12. I am very careful about shotgun recipes ,always sticking to the components listed . I have no load data for 2-7/8"brass shells . There seems to be lots of data for plastic shells. Do you have any loads for brass and 7625 or any other smokeless powder ?

I load pretty much all Cheddite (RST) hulls with a smattering of Federal (RST) too. All 2 7/8". The only brass I load are for 12g black powder along with 12g BP paper hulls and they are both the same recipe.