2 7/8" 10ga Reloading Data

[J.B. Books]

Originally Posted by Cory Rams

I have been looking for more load data. I have a 2 7/8” lee loader coming. The load card has a few loads on all the data posted here...or I didn’t see listed with a federal case. The loads are 1 5/8oz lead with 30 grains of red dot and a few other powders. No pressures listed with the loads. Anyone have a pressure listing with the red dot load? The reason I ask is I have red dot powder. The lee load table card shows both plastic and paper over shot wads listed with seating pressures. I thought these loaders were made before plastic wads were around? Guess not.

I would consider thirty grains of Red Dot with any lead load including 1 1/8 ounce to be dangerous. I would never shoot that much Red Dot in any short ten loading. Those loadings would likely hurt your gun and potentially cause you physical harm. I believe that Red Dot was reformulated since those loadings were published. You would be better off to start with light loadings like 19 gr. of Red Dot with 1 1/8 ounce of lead shot and enjoy your gun. Please stop trying to make a 150 year old hammer gun something it is not and was never meant to be with your ideas of heavy loads. I am concerned it won't end well for you.